American-Lincoln Technology
3366XP / 4366XP
FORM NO. 56041668 -
15
NOTE
After stopping the engine, perform these post operation checks.
POST-OPERATION CHECK LIST
1. Clean debris hopper.
2. Check brooms for wear or damage.
3. Check
all
fl
aps for wear, damage and adjustment.
4. Fill the fuel tank.
WARNING!
The gasoline tank access is located behind the driver’s seat.
DO NOT mistake the
hydraulic reservoir
for the fuel tank.
5. Check all systems for leaks.
OPERATING INSTRUCTIONS
DUMP
LEVER
LIFT
LEVER
FIGURE 11a
TO EMPTY DEBRIS HOPPER
1. Set engine throttle to full throttle position.
2. Push the hopper rotate and dump lever to the “DUMP” position. The hopper will begin to rotate.
3. Once the hopper rotation speed doubles, the hopper lift lever will work. Raise the hopper to the desired level (MINIMUM OF 8”
or 20 cm OF LIFT REQUIRED) by pulling back the hopper lift lever to the “RAISE” position.
4. Drive forward 12 to 18 inches slowly with the hopper up before completing the dump cycle.
5. Push the hopper rotation and dump lever to the “DUMP” position to complete dump cycle.
6. Drive in reverse 12 to 18 inches or 30 to 46 cm. slowly with the hopper up to clear the dumpster before lowering the hopper.
7. Pull the hopper rotation and dump lever to the “RETURN” position and the hopper will automatically rotate and lower to its proper
position.
WARNING!
Never turn off the engine with the hopper in the lifted position.
