INDOOR DOME INSTALLATION
SPEEDDOME ULTRA
2-20
Skirt and Bubble Attachment
The following procedures show you how to attach
skirts and bubbles to a top hat housing or indoor
SpeedDome housing.
Note:
If using the install/removal tool to attach/
detach the skirt or bubble, see “Using the Install/
Removal Tool” on page 2-22 for instructions.
Attaching the Skirt to the Top Hat
Housing (No Bubble Used)
Install Kit Required
RHIUH Top Hat Housing*
Housing, top hat
1
0500-7455-01
Skirt assembly, top hat
1
0400-0880-01
* Only parts used in this procedure are listed.
Procedure
Referring to Figure 2-22:
1. Insert the skirt’s T-lanyard into the slot in
the top hat housing until both ends of the
“T” catch securely.
Insert T-lanyard exactly as shown in
Figure 2-22 to ensure that the skirt is
securely attached. Ensure that “T”
extends fully once inserted.
2. Attach the skirt magnetically to the bottom
of the top hat housing.
Attaching the Bubble to the Top Hat
Housing (No Skirt Used)
Install Kit Required (pick Kit A, B, C, or D)
A) RU105UD Clear Bubble
B) RU106UD Silver Bubble
C) RU107UD Smoked Bubble
D) RU108UD Gold Bubble
Procedure
Referring to Figure 2-22:
1. Insert the bubble’s T-lanyard into the slot in
the top hat housing until both ends of the
“T” catch securely.
Insert T-lanyard exactly as shown in
Figure 2-22 to ensure that the bubble
is securely attached. Ensure that “T”
extends fully once inserted.
2. Attach the bubble magnetically to the
bottom of the top hat housing. The skirt is
not used in this case.
Figure 2-22. Top hat skirt and bubble
attachment
Skirt Attachment
Bubble Attachment
1
2
To Secure T-Lanyard
