American Dynamics MegaPower ADMPCPU, Administrator'S Manual

Page: 65 / 86

MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
63 of 82
Declarations
Regulatory Compliance
EMC...........................................................47 CFR, Part 15
EN
50130-4
EN 55022
EN 61000-3-2
EN 61000-3-3
Safety ............................... UL/IEC/EN/CSA C22.2.60950-1
Environmental .............................. RoHS 2002/95/EC
WEEE 2002/96/EC
IP code X0
Regulatory Type:
ADMPCPU-MPU
ADMPCPU-PORT
ADMPCPU-TRAY
FCC COMPLIANCE: This equipment has been tested
and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes or modifications not expressly
approved by Sensormatic Electronics Corporation, the
party responsible for FCC compliance, could void the
user's authority to operate the equipment and could create
a hazardous condition.
Other Declarations
Thank you for using American Dynamics products. We
support our products through an extensive and worldwide
network of dealers. The dealer, through whom you
originally purchased this product, is your point of contact
if you have a need for service or support. Our dealers are
fully empowered to provide the very best in customer
service and support. Dealers should contact American
Dynamics at (800) 507-6268 or (561) 912-6259 or on the
web at www.americandynamics.net.
WARRANTY DISCLAIMER: Sensormatic Electronics
Corporation makes no representation or warranty with
respect to the contents hereof and specifically disclaims
any implied warranties of merchantability or fitness for
any particular purpose.
NOTICE: The information in this manual was current
when published. The manufacturer reserves the right to
revise and improve its products. All specifications are
therefore subject to change without notice.
LIMITED RIGHTS NOTICE: For units of the
Department of Defense, all documentation and manuals
were developed at private expense and no part of it was
developed using Government Funds. The restrictions
governing the use and disclosure of technical data marked
with this legend are set forth in the definition of “limited
rights” in paragraph (a) (15) of the clause of DFARS
252.227.7013. Unpublished - rights reserved under the
Copyright Laws of the United States.
TRADEMARK NOTICE: American Dynamics and
Sensormatic are trademarks or registered trademarks of
Sensormatic Electronics Corporation. Other product
names mentioned herein may be trademarks or registered
trademarks of Sensormatic or other companies.
COPYRIGHT: Under copyright laws, the contents of this
manual may not be copied, photocopied, reproduced,
translated or reduced to any electronic medium or
machine-readable form, in whole or in part, without prior
written consent of Sensormatic Electronics.
WJM 01/2009
www.americandynamics.net