American Dynamics MegaPower 3200 User Manual Download Page 8

MEGAPOWER 3200 EXTENDED DOME/PTZ CAMERA PROTOCOL 

8200-0421-23, REV. A 

USER GUIDE 

6 of 25

 

Common parameters for Bosch Autodome are: 

<ParameterFormatting> 

<Parameter Name="{check}"   Style="byte" 
Width="7" Method="sum" /> 

<Parameter Name="{camera}"   Style="7H7L" 
Width="14" Base="-1" /> 

<Parameter Name="{preset}"   Style="byte" 
Width="7" /> 

</ParameterFormatting> 

Common parameters for BBV Star, Pelco-D, and 
Pelco-P are: 

<ParameterFormatting> 

<Parameter Name="{check}"   Style="byte" 
Width="8" Method="xor" /> 

<Parameter Name="{camera}"   Style="byte" 
Width="8" Base="255" /> 

<Parameter Name="{preset}"   Style="byte" 
Width="8" /> 

<Parameter Name="{pattern}"   Style="byte" 
Width="8" Base="255" /> 

<Parameter Name="{speed}"   Style="byte" 
Width="8" /> 

<Parameter Name="{PanSpeed}"   Style="byte" 
Width="8" /> 

<Parameter Name="{TiltSpeed}"   Style="byte" 
Width="8" /> 

</ParameterFormatting> 

Only commands with capabilities specified as 
supported should be defined within the 
<Command> element. Unused commands can be 
omitted, or you can set their templates to an empty 
string (or set the count to zero). 

Declarations 

CUSTOMER SERVICE: 

Thank you for using American 

Dynamics products. We support our products through an 
extensive and worldwide network of dealers. The dealer, 
through whom you originally purchased this product, is your 
point of contact if you have a need for service or support. Our 
dealers are fully empowered to provide the very best in 
customer service and support. Dealers should contact 
American Dynamics at (800) 507-6268 or (561) 912-6259 or 
on the web at www.americandynamics.net. 

WARRANTY DISCLAIMER:

 Tyco International Ltd. 

makes no representation or warranty with respect to the 
contents hereof and specifically disclaims any implied 
warranties of merchantability or fitness for any particular 
purpose. 

NOTICE: 

The information in this manual was current when 

published. The manufacturer reserves the right to revise and 
improve its products. All specifications are therefore subject to 
change without notice. 

LIMITED RIGHTS NOTICE:

 For units of the Department 

of Defense, all documentation and manuals were developed at 
private expense and no part of it was developed using 
Government Funds. The restrictions governing the use and 
disclosure of technical data marked with this legend are set 
forth‎in‎the‎definition‎of‎“limited‎rights”‎in‎paragraph‎(a)‎(15)‎
of the clause of DFARS 252.227.7013. Unpublished - rights 
reserved under the Copyright Laws of the United States. 

TRADEMARK NOTICE:

 The trademarks, logos, and 

service marks displayed on this document are registered in the 
United States [or other countries]. Any misuse of the 
trademarks is strictly prohibited and Tyco International Ltd. 
will aggressively enforce its intellectual property rights to the 
fullest extent of the law, including pursuit of criminal 
prosecution wherever necessary. All trademarks not owned by 
Tyco International Ltd. are the property of their respective 
owners, and are used with permission or allowed under 
applicable laws. 

Product offerings and specifications are subject to change 
without notice. Actual products may vary from photos. Not all 
products include all features. Availability varies by region; 
contact your sales representative. 

COPYRIGHT:

 Under copyright laws, the contents of this 

manual may not be copied, photocopied, reproduced, 
translated or reduced to any electronic medium or machine-
readable form, in whole or in part, without prior written 
consent of Tyco International Ltd. © 2011 and its Respective 
Companies. All Rights Reserved. 

American Dynamics  
6600 Congress Avenue 
Boca Raton, FL 33487 U.S.A. 

 

www.americandynamics.net 

Summary of Contents for MegaPower 3200






























Reviews: