Intellex
®
Digital Video Management System Installation and Operating Instructions
141
Image Database Search
MORE>>>
4.
Click up arrow or down arrow to display the correct number
of seconds (five-second increments).
NOTE: When searching the database, the unit may skip a few
seconds more or less than the setting.
Filter —
Use this option to select the filter for searching the
image database. The default is
None
.
NOTE: Before you can configure a search filter, you must record
at least one image from the camera. Until an image is
recorded, the filter options are disabled.
1.
Click down arrow. A list of filters appears.
2.
Click the correct filter.
3.
Click
Setup
to configure the filter (see
Setup —
Select a filter for this search; then click
Setup
to
configure it (see
).
Select the
Mode
or
Date/Time
tab to define a search for a specific
video segment.
Find —
Click to start the search using the entered search criteria.
As soon as a search is started:
•
the unit erases any previous search results from the screen
•
the search icon moves while the unit is searching
•
the unit lists matching video segments as they are found
Stop —
Click to interrupt the search process. The unit lists all
video segments that it found before the interruption.
Play —
Click to play back a video segment.
1.
Select a video segment from the
Search Results
portion of
the screen (see
).
2.
Click
Play
to begin playing the video segment. The playback
screen appears (see
Click
New
to clear the current search criteria on all of the search
screens and begin a new search. The unit erases the previous
search results from the screen. Click
Close
to close this screen.
Either the main screen or the playback screen appears. Click
Help
