American DJ Vizi Spot LED PRO, User Instructions

Page: 9 / 28

American DJ
®
- www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 18 American DJ
®
- www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 17
VER (Version) - Displays the software version
ADJU - Calibration functions
EDIT MENU -
SEPR (AUTO IP01 - IP07) - Lets you edit any of the 7 internal
programs.
STEP (S-01 - S-48) - These are the steps slots that you write
your programs into. There are at total of 48 steps. See edit pro-
gram.
SCXX (SC01 - SC30) - These are the scenes that are stored in
your program. There are a total of 30 scenes.
REC - This will auto save your custom program.
RUN - This will run your custom program.
Vizi Spot LED PRO System Menu Vizi Spot LED PRO System Menu
On-Board System Menu.
The Vizi Spot LED PRO ccomes with an
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu.
To access the main menu press the MODE/ESC button (3) on the front
of the unit. Tap the UP (4) or DOWN (5) butons until you reach function
you wish to change. When you reach the function you wish to change
tap the ENTER button. Again, tap the UP or DOWN buttons to change
the function. Once your changes are made, tap the ENTER button to
lock the change in the system, if the ENTER button is not selected
within eight seconds the system will automatically return to menu sec-
tion. To exit without making any changes tap the MODE/ESC button.
ADDR MAIN MENU -
ADDR
DMX Address Setting via control board -
1. Access the main menu.
2. Tap the UP button until “
ADDR ” is displayed, press ENTER.
4. Now the display will show “ A001 ”. Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to confirm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on “ A001 ”, you can directly press the UP
or DN buttons to change the DMX start address.
TEST MAIN MENU -
TEST
- This will test the functions of each channel.
1. Access the main menu.
2. Tap the UP button until “
TEST ” is displayed, press ENTER.
3. The display will show “ T-01 ”. You can now press the up
button and test the different channels.