American DJ
®
- www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 37
American DJ
®
- www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 38
Operating Modes: The Vizi Spot LED PRO can operate in three
different modes. This next section will detail the differences in
the operating modes.
• Stand alone mode -
The unit will react to sound, or chase through the built-in programs.
• Master/Slave mode -
You can daisy chain up to 16 units together to get a synchronized
light show without the need of an external controller. The units will
react to sound or chase through the built-in programs.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
®
Show
Designer.
™
Universal DMX Control:
This function allows you to use a uni-
versal DMX-512 controller such as the Elation
®
DMX Operator™ or
Elation
®
Show Designer™ to control head movement, the color wheel,
gobo wheel, prism, and the shutter (strobe). A DMX controller allows
you to create unique programs tailored to your individual needs.
1. The Vizi Spot LED PRO has a 12 channel DMX mode and 14
channel DMX mode. To select your desired DMX mode please
see page 23 “FINE” menu See pages 39-44 for detailed descrip-
tion of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 10-12 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 18 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone (Sound Active or Auto Program):
This mode allows
a single unit to run to the beat of the music or run through a built-in
program.
1. Access the main menu.
Vizi Spot LED PRO
Operation
missing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
05Er – COLOR WHEEL error:
This message will appear after a fixture reset, if the head’s mag-
netic-indexing circuit malfunctions (sensor failed or magnet is
missing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
06Er – ROTATING GOBOS error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
07Er – GOBO ROTATING error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
08Er – PRISM error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
10Er – FOCUS error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
Vizi Spot LED PRO
Error Codes
