American DJ Vizi Spot LED PRO, User Instructions

Page: 20 / 28

American DJ
®
- www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 39
Vizi Spot LED PRO 14 Channel Mode
Channel Value Function
1 0 - 255 PAN MOVEMENT 8bit
2 0 - 255 PAN FINE 16bit
3 0 - 255 TILT MOVEMENT 8bit
4 0 - 255 TILT FINE 16bit
5 COLOR WHEEL
0 - 14 OPEN
15 - 29 COLOR 1
30 - 44 COLOR 2
45 - 59 COLOR 3
60 - 74 COLOR 4
75 - 89 COLOR 5
90 - 104 COLOR 6
105 - 119 COLOR 7
120 - 127 COLOR 8
128 - 189 FORWARD RAINBOW EFFECT
FAST - SLOW
190 - 193 NO ROTATION
194 - 255 BACKWARDS RAINBOW EFFECT
SLOW - FAST
6 GOBOS
0 - 9 OPEN
10 - 19 ROTATING GOBO 1
20 - 29 ROTATING GOBO 2
30 - 39 ROTATING GOBO 3
40 - 49 ROTATING GOBO 4
50 - 59 ROTATING GOBO 5
60 - 69 ROTATING GOBO 6
70 - 79 ROTATING GOBO 7
80 - 95 ROTATING GOBO 1 SHAKE
96 - 111 ROTATING GOBO 2 SHAKE
112 - 127 ROTATING GOBO 3 SHAKE
128 - 143 ROTATING GOBO 4 SHAKE
144 - 159 ROTATING GOBO 5 SHAKE
American DJ
®
- www.americandj.com - Vizi Spot LED PRO - Instruction Manual - Page 40
Vizi Spot LED PRO Operation
2. Tap the UP button until
“ PLAY ” is displayed, and Press ENTER.
3.
Tap the UP button until “ AUTO ” is displayed, and Press ENTER.
4. Press UP, to select “ OFF ”, “ RUN ”, or “ AUDI ”. “ RUN ” will make the
unit run through a built-in program. “ AUDI ” will make the unit
sound active.
5. Select a mode, and press ENTER to confirm.
6. Press MODE/ESC if you want to return to the main menu.
7. You may change the show or invert the pan and tilt functions
in the system menu by following the directions on page 22.
Master-Slave Operation (Sound Active or Auto Program):
This function will allow you to link up to 16 units together and oper-
ate without a controller. The units can run a built-in program or run in
sound actiive mode. In Master-Slave operation one unit will act as the
controlling unit and the others will react to the controlling units pro-
grams. Any unit can act as a Master or as a Slave.
1. Using standard XLR data cables, daisy chain your units together
via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector is
the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Access the main menu.
2. Tap the UP button until
“ PLAY ” is displayed, and Press ENTER.
3.
Tap the UP button to choose between “ RUN ” or “ AUDI ”. “ RUN ” will
make the units run through a built-in program. “ AUDI ” will make
the units sound active.
4. Press UP, to select “ ALON ” or “ NAST ”. Which means stand alone,
or master/slave mode.
5. Select a mode, and press ENTER to confirm.
6. Press MODE/ESC if you want to return to the main menu
7. You may change the show or invert the pan and tilt functions
in the system menu by following the directions on page 22.