![background image](http://html1.mh-extra.com/html/american-dj/vizi-spot-5r/vizi-spot-5r_user-instructions_2923239027.webp)
American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 53
American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 54
Fuse Replacement: First unplug the power. The fuse holder is located
next to the power cord. Using a flat-head screw driver unscrew the
fuse holder. Remove the bad fuse and replace with a new one.
Vizi Spot 5R Lamp & Fuse Replacement
Caution:
Always replace with the exact same type lamp and fuse,
unless otherwise specified by an authorized American DJ
®
service
technician. Replacing with anything other than the specified part can
damage your unit and will void your manufactures warranty.
Warning:
If you continue to blow lamps or fuses, STOP using the
unit. Contact customer support for further instructions, you may have
to return the unit for servicing. Continuing to use the unit may cause
serious damage.
Lamp Replacement:
Caution! Never attempt to change the lamp
while the fixture is plugged in. Always disconnect the main power
and allow the unit ample time to cool before attempting to replace
the lamp. Please see page 7 for important information regarding the
discharge lamp.
1. Be sure to follow the proper handling procedures that deal with
discharge lamps.
2. Remove the two small screws (A,B) on the rear of the unit
3. After removing the screws, remove the panel.
4. Loosen the 4 phillips screws that hold the lamp in place. Once
the screw are loose, gently turn the lamp counter-clockwise to
release the lamp from the holder.
5. Replace the lamp with an exact match, then gently turn the lamp
clockwise to situate the lamp into the holder and tighten the
screws that hold the lamp in place. Reassemble in reverse order.
A
B
Vizi Spot 5R
Cleaning
Vizi Spot 5R
Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120v wall
outlet.
2. Be sure the external fuse has not blown. The fuse is located on
the bottom panel of the unit.
3. Remove the lamp holder and be sure the lamp is seated in its
socket properly. Occasionally lamps become loose during ship-
ping be sure the lamp is push in to its socket all the way.
4. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.