![background image](http://html1.mh-extra.com/html/american-dj/vizi-spot-5r/vizi-spot-5r_user-instructions_2923239009.webp)
Vizi Spot 5R
System Menu
ADDRESS MENU -
A001 - A511
- This is where you set the DMX address of the unit.
TEST MENU -
T-01 - T-XX
- Tests the functions of each channel.
Note: Some channels cannot be tested.
PLAY MENU -
AUTO
- This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• “Clos” - The fixture will close the lens shutters.
• “Hold” - This is the default setting, which in case the signal is
lost the fixture will “hold” at the last setting.
• “Auto” - The fixture will go into Auto mode and run a pre-pro-
grammed show.
• “Audi” - The fixture will go into Sound Active mode.
LAMP MENU -
ON/OFF
- Manually switches the lamp “On” or “Off”.
RESE (RESET) MENU -
ALL
- Resets all motors.
SCAN
- Resets the pan/tilt motors.
COLR
(Color) - Resets the color wheel motor.
GOBO
- Resets the gobo wheel motor.
SHTR
(Shutter) - Resets the shutter and dimmer motors.
OTHR
- Resets all other motors.
TIME MENU -
LIFE
- Displays the total fixture running time.
LAMP
- Displays the lamp running time.
CLMP
- Clears the lamp running time.
RPAN MENU -
ON/OFF
- Reverses the pan.
RTLT MENU -
ON/OFF
- Reverses the tilt.
FINE MENU -
ON/OFF
- Switch between 8bit (coarse) and 16bit (fine) pan & tilt
movement. This also switches the DMX channel mode between
11 channel (8 bit) and 13 channel (16 bit) DMX mode.
DEGR MENU -
540/360
- Switch the degree of the Pan between 360 and 540.
MIC MENU -
M-01-M-70
- With this function you can make the internal mic
more or less sensitive to sound.
DISPLAY MENU -
VALU
(DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON
- Turns digital display off after 2 minutes.
FLIP
- “Flips” the digital display 180º.
LOCK
- When activated the buttons will lock automatically after
15 seconds.
SPEC MENU -
LAAU
- On/Off Automatically switches on lamp when power is
applied.
RDMX
- On/Off With this function you are able to change the
DMX address via external controller. See pages 29-30.
DLOF
(Lamp Adjustment) - With this function you can adjust the
lamp via the control board. In this mode, the device will not
react to any control signal.
DLAY -
With this function you can put the lamp on a delay time.
Vizi Spot 5R
System Menu
American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 18
American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 17