American DJ Vizi Spot 5R, User Instructions

Page: 19 / 28

American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 37 American DJ
®
- www.americandj.com - Vizi Spot 5R Instruction Manual Page 38
gram. You can set the number of steps under “ STEP ”, and
you can edit the individual scenes under “ EDIT ” .
1. Access the main menu.
2. Tap the UP button until “
EDIT ” is displayed, press ENTER.
3. Tap the UP button until “ RUN ” is displayed, press ENTER.
4. Press the UP button to display “ ON ” to activate this function,
or “ OFF ” to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
Vizi Spot 5R Editing Program Vizi Spot 5R System Menu
Editing procedure 1: Using the control board only.
1. Access the main menu.
2. Tap the UP button until “
EDIT ” is displayed. Press ENTER.
3. The display will show “ SC01 ”, this stands for the scene
number. For example, “ SC01 ” is displayed, it means you will
be editing scene 1, press ENTER. You can change the scene
number by pressing the UP button.
4. Press ENTER, the display will show “
C-XX ”, “XX” stands for
the channel number displayed. If “ C-01 ” is displayed, you will
be editing channel 1 of your selected scene, press ENTER
once you have found your desired channel. You can change the
channel number by pressing the UP button.
5. The display will show “
XXX ”. “XXX” represents the displayed
DMX value for the channel that is being edited.
6. Adjust the DMX value by pressing the UP button, until you
get the expected effect for this channel.
7. Press ENTER to enter the editing of the other channels of the
scene.
8. Repeat steps 5-8, until you finish setting all the DMX values
for all the channels of this scene, each scene can have 15
channels maximum.
9. Once all the channels are completed, the display will flash
“ TIME ”, this stands for the time needed to run this scene.
10. Press ENTER to edit the time needed, the display shows
“ T-XX ”, “XX” stands for the time needed to run this scene. For
example, “ T-02 ” means scene 1 needs 6 seconds to run, “ T-15 ”
means scene 5 needs 45 seconds to run.
11. Adjust the time needed by pressing the UP button.
12. Press ENTER to save the settings for the scene you are
editing, the display will change to the next scene automatically.