1. PRECAUTIONS ON HANDLING COMPACT DISCS
• Do not allow fingerprints, oil or dust to get on the surface of the disc. If the disc is dirty, wipe it off with a
soft dry cloth.
• Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated
cloths to clean discs.
• Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its
• Do not bend the disc.
• Do not apply heat.
• Do not enlarge the hole in the center of the disc.
• Do not write on the label (printed side) with a hard tipped implement such as a pencil or ball point pen.
• Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in
winter. Do not attempt to dry the disc with a hair dryer, etc.
2. PRECAUTION ON STORAGE
• After playing a disc, always unload it from player.
• Always store the compact disc in the jewel case, protecting from dirt or damage
• Do not place discs in the following areas:
a) Areas exposed to direct sunlight for a considerable time
b) Areas subject to accumulation of dust or high humidity.
c) Areas affected by heat from indoor heaters, etc.
COMPACT DISCS
American DJ
®
AUDIO • Pro Scratch 1™ INSTRUCTION MANUAL • PAGE 26
MATCHING THE BEATS PER MINUTE (BPM)
Beat matching is the act of finding the BPM’s (beats per a minute) of two different music sources, and
matching them together. After you have matched the BPM’s you use your mixer to fade the volume
in and out of one song to the next without music interruption while retaining the same beat. Use
the
PITCH SLIDER (17)
to match the BPM’s of one PRO SCRATCH 1™ to that of another PRO
SCRATCH 1™ or other music source. Use your mixer's crossfader to blend them in to each other
seamlessly. This is a function that may take some practice.
