![background image](http://html1.mh-extra.com/html/american-dj/pro-scratch-1/pro-scratch-1_user-manual_2922827023.webp)
BASIC OPERATIONS - FX MIX
American DJ
®
AUDIO • Pro Scratch 1™ INSTRUCTION MANUAL • PAGE 23
American DJ
¤
88
00:00 00
160
EFFECT
ELAPSED
SINGLE
TOTAL REMAIN
CUE
T
M
S
F
CUE BPM
BEAT SYNC.
AUTO
18
LOCK
LOOP
RELOOP
PITCH
.
--
KEY
BPM
PROGRAM
NONSTOP
1 2 3 4 5 6 7 8 9 0
--
FLASH 1
FLASH 2
FLASH 3
DIGITAL TURNTABLE
Pro-Scratch1
CUE
REV
FWD
Scratch
SEARCH
FX
MIX
MEMORY
SAMPLER
TRACK
DISC IN/OUT SLOT
BOP
ENTER
SAMPLE PITCH
PITCH BEND
P
IT
C
H
C
O
N
TR
O
L
8%/12%/16%
ON/OFF
ON/OFF
SGL/CTN
ON/OFF
HOLD
FLANGER/
ECHO
TRANS/
PAN
SCRATCH/
FADE
SKID/COAST
PARAMETER
EJECT/
STOP
PROFESSIONAL CD PLAYER
POWER
ON
OFF
RELOOP
OUT
IN
SEAMLESS
LOOP
Figure 49
Figure 50
Figure 48
FX MIX MODE:
This function allows you to use the effects to transfer from one track to another, one track
to a sample, or one sample to another. FX Mix uses the effects and the
FLASH BUTTONS (6)
. The FX Mix
function will only work with samples and cue points programmed in the any of the three
FLASH BUTTONS (6)
.
The procedure below list the steps to activate the FX Mix Mode. In the following example we will you the SKID
Effect to transfer from one track to a programmed sample.
STEP ONE:
Be sure you have created a sample and stored it in to the
FLASH 3 BUTTON (6)
(see creating a sample on page). After a sample has
been created and store, begin playback on
a track. Select the
FX MIX BUTTON
(11)
to activate the FX Mix Mode.
STEP TWO:
After you have activated FX Mix Mode, select an effect. In this
example we will choose the SKID Effect. Choosing the SKID Effect we create a
braking effect.
STEP THREE:
When you are at the point in the track you wish to begin the
sample, press the
FLASH BUTTON 3 (6)
.
Pressing the
FLASH BUTTON 3 (6)
will
now end the current track and beginning to play the sample stored in the Flash 3
bank. The track will end in a brake effect and then immediately being to play you
stored sample in Flash Bank 3.
STEP FOUR:
To initiate the FX Mix , tap the
BOP/ENTER BUTTON (20).
At this
point you may continue the FX with the current track. If you follow steps one and
four, you will initiate the FX mix on the current track. For example; If you used the
brake effect for your effects mix, following steps one and four will initiate a brake
effect in current track and then continue with the track once the brake effect has
ended. You must be in continuos play mode for this effect to operate properly.
Figure 51