ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 17
ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 18
Inno Beam LED
Home Adjustment Menu
To enter the home adjustment submenu, press the ENTER button for
at least 5 seconds. In this submenu you are able to adjust the original
position (home position) of certain functions.
Pan Offset
- Adjustment of the pan home position.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that “
Pan Offset
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Tilt Offset
- Adjustment of the tilt home position.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that “
Tilt Offset
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Color Offset
- Home setting adjustment for the color
wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that “
Color Offset
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
2. Press the MENU button to leave this function.
Reset
- Use this function to reset the motors.
1. Tap the MENU button until “Reset” is displayed, press
ENTER.
2. The fixture will now reset the motors.
Inno Beam LED
System Menu