American DJ Inno Color Beam LED, User Instructions, Page: 14 / 16

ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 27
Inno Beam LED Cleaning
Inno Beam LED Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120v wall
outlet. Be sure to voltage selector switch in the correct position.
2. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
3. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses and mirror should be carried out periodically to
optimize light output. Cleaning frequency depends on the environ-
ment in which the fixture operates (I.e. smoke, fog residue, dust,
dew). In heavy club use we recommend cleaning on a monthly basis.
Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Inno Beam LED Fuse Replacement
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 28
Inno Beam LED 14 Channel Mode
Channel Value Function
14 DIMMER MODES
0 - 20 STANDARD
21 - 40 STAGE
41 - 60 TV
61 - 80 ARCHITECTURAL
81 - 100 THEATRE
101 - 255 UNIT DEFAULT
Inno Beam LED Dimmer Curve Chart
(Fade Time) (Fade Time)
Ramp Effect
Standard
Stage
TV
Architectural
Theatre
1.0 2.0 3.0 4.0 5.0 Distance(m) 0
0m( )
LED-SC25
1.0 2.0 3.0 4.0 5.0
Distance(m)
0
0m( ) 12
10700 3200 1360 850 520 LUX
MH-635S
R
G
B 1458 417 154 115 82
2790 780 356 207 143
425 123 58 36 28
RGBW
1m 2m 3m 4m 5m
4500
1280 584 339 227
1.0 2.0 3.0 4.0 5.0
Distance(m)
0
0m( ) 11
LED-SC50C
21500 5400 2100 790 1200
1.0 2.0 3.0 4.0 5.0
Distance(m)
0
0m( ) 11
7600 2150 960 380 240
LUX
LED-SC50D
1.0 2.0 3.0 4.0
Distance(m)
0
0m( )
5.0
1.0 2.0 3.0 4.0
Distance(m)
0
0m( )
780 356 207
5.0
143
60
60
1.0 2.0 3.0 4.0 Distance(m) 0
0m( )
159000 75300 40060 19930
5.0
14470
6
6.0
9800
1.0 2.0 3.0 4.0 Distance(m) 0
0m( )
30900 10920 4916 2085
5.0
1788
17
6.0
1213
1.0 2.0 3.0 4.0
Distance(m)
0
0m( )
87640 22330 10150 5834
5.0
3700
12
6.0
2529
7.0 8.0 9.0 10.0
INNO BEAM LED
Inno Beam LED Photometric Chart