![background image](http://html1.mh-extra.com/html/american-dj/inno-color-beam-led/inno-color-beam-led_user-instructions_2923108002.webp)
ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 3
ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 2
• DMX-512 Protocol Compatible
• 2 DMX Modes: 12 Channel Mode & 14 Channel Mode
• 8 White
• 4 Fixed Gobos & 4 Spots
• 3 Operating Modes - Sound Active, Show Mode, & DMX Control
• Digital Display for Address and Function Setting
• UC3 Control (Controller Not Included)
• 4 Preprogrammed Shows
• Power Cord Daisy Chain (See page 10)
Inno Beam LED Features
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modification to this unit.
Inno Beam LED Handling Precautions
Inno Beam LED
Warranty Registration
The Inno Beam LED carries a 2 year (730 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www. adj-
products.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact ADJ Products, LLC
customer support for a R.A. number.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Inno Beam LED
General Instructions
Inno Beam LED
General Information
Unpacking:
Thank you for purchasing the Inno Beam LED by ADJ
Products, LLC. Every Inno Beam LED has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your fixture for
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
contacting customer support first.
Introduction:
The Inno Beam LED is a 13 channel DMX intelligent,
moving head, LED fixture. The Inno Beam LED can operate as a stand
alone fixture or in a Master/Slave configuration. The Inno Beam LED
has three operating modes; a sound active, show mode, DMX con-
trolled. This fixture is suitable for theaters, studios, retail stores, and
other similar locations. For best results use fog or special effects smoke
to enhance the beams projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!