![background image](http://html1.mh-extra.com/html/american-dj/inno-color-beam-led/inno-color-beam-led_user-instructions_2923108006.webp)
ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 11
ADJ Products, LLC - www.adj.com - Inno Beam LED Instruction Manual Page 12
Inno Beam LED
System Menu
System Menu: When making adjustments you can press
ENTER to confirm your setup then press and hold the
MENU button for at least 3 seconds to lock it in, or you can
wait 8 seconds for automatic setup. To exit without making
any adjustments press the MENU button.
CONTROL PANEL LOCK:
The control panel will lock itself after 30 seconds if noth-
ing is pressed. To unlock the control panel, press the MENU
button for 3 seconds.
DMX Address
-
Set the DMX Address -
1. Press the MENU button until “DMX Addresss” is displayed,
press ENTER.
2. “X” will now be displayed, “X” represents the displayed
address. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm, and then press and hold the MENU
button
for at least three seconds
to assign.
Channel Mode
- This will let you select your desired
DMX Channel mode.
1. Press the MENU button until “Channel Mode” is displayed,
press ENTER.
2. “X Chan” will now be displayed, “X” represents the displayed
DMX channel mode; either 12 Channel Mode or 14 Channel
Mode. Press the UP or DOWN buttons to find your desired Chan-
nel mode.
3. Press ENTER to confirm.
Show Mode
- Show modes 1 - 4 (Factory Shows).
1. Press the MENU button until “Show Mode” is displayed, press
ENTER.
Inno Beam LED
System Menu
MENU
DMX Address
Sound Sense
Dimmer Calibrat
Pan Invert
Tilt Invert
Show Mode
No DMX
Dimmer Mode
Slave Mode
Sound State
Back Light
Auto Test
Fixture Time
Firmware Version
Reset
Channel Mode