ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 31
ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 30
Illusion Dotz 4.4
System Menu
050.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that
“Effect Adjust” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until
“Calibration” is displayed,
press ENTER.
3. “XXXX” will be displayed. The password is 050.
4. Press ENTER to confirm or press MODE to exit.
PROGRAM -
The fixture comes equipped with a built-in DMX
recorder that allows custom programs to be installed and recalled
directly from the fixture’s control board. Programs can be created and
stored using the fixture’s control board or by using an external DMX
controller.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Program”
is highlighted, then press ENTER.
2. Use the UP or DOWN buttons to find and access one of the below
submenus.
Select Program –
This function allows the user to select one of ten
of the user defined built-in programs. This program is then accessed
in “Function Mode” under “Program Run.”
Edit Program –
This function allows the user to edit the built-in pro-
grams.
Edit Scene –
This function allows the user to edit or define the actual
scenes that are stored in the user defined built-in programs that are
accessed in the previous step.
Scene Input -
The Illusion Dotz 4.4 features an integrated DMX
recorder. Preprogrammed scenes can be transmitted to the fixture via
any DMX compliant controller. This function allows those scenes to
be stored in to the fixture’s built-in memory and
then subsequently used to create the user-defined programs.
Universal DMX Control:
This function allows you to use a uni-
versal DMX-512 controller such
as the Elation
®
DMX Operator™ or
Elation
®
Show Designer™ to control head movement, RGB colors,
master dimmer, shutter (strobe), and various other features. A DMX
controller allows you to create unique programs tailored to your indi-
vidual needs.
1. The Illusion Dotz 4.4 has a 12 Channel mode, 14 Channel mode,
and 59 Channel mode. See pages 34-44 for detailed description
of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 13-15 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the directions on page 36 to select your DMX Channel
mode, and follow the instruction on page 17 to set the DMX
address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone (Sound Active or Auto Program):
This
mode
allows
a single unit to run to the beat of the music or run through a built-in
program.
AUTO PROGRAM:
1. Access the main menu, and press the UP or DOWN buttons so
that “
Function
” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “
Disp Set
” is displayed, and
press ENTER.
3. Press the UP or DOWN buttons until “
Auto Pro
” is displayed, and
press ENTER.
4. Either “Master” or “Alone” will be displayed. Using the UP or
DOWN buttons select “Alone” and press ENTER.
SOUND ACTIVE:
1. Access the main menu, and press the UP or DOWN buttons so
that “
Function
” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “
Disp Set
” is displayed, and
Illusion Dotz 4.4
Operation
