American DJ DMX-SOLO, User Manual

Page: 9 / 24

2. Operation Guide 1. Overview
2.1 Record Mode
2.1.1 Record Enable
2.1.2 Record Scenes
1.2 Back View
5 6
Press and hold down the Record/Mode
button for five seconds, the LED above
it lights indicating Record mode is active,
the Segment Display shows the program
and its scene of last time.
The DMX LED will light when DMX signal
is present.
1. Record enable.
2. Tap the Program or Strobe button to select
chase programs or strobe programs. The
LED near it lights indicating your selection.
3. Tap the Up/Down button to select the program
you wish to record scenes into.
There are total 9 chase programs and 9 strobe
programs.
2
1 2 3
4
1. DC Input
2. DMX In
3. DMX Out
4. DMX Polarity Select
DC 12V, 300mA min.
controller or receives file dump from last unit.
DMX fixture or sends file dump to the next unit.
Move to select DMX polarity.
This connector sends DMX signal through to the
This connector accepts DMX signal from a DMX