2. Operation Guide
2. Operation Guide
2.6 Receive File Dump
2.7 Black-out Mode
20
19
i n
3. Tap the Fade+Speed button to receive file dump,
the Segment Display shows "IN".
During the course of sending, all other operation
doesn't work.
4. When this unit completes receiving, the Segment
Display shows "END". Tap any button to leave
this mode.
1. Turn the power off.
2. Press Speed and Black-out buttons at a time
while turning the power on. If the Segment
Display shows "Y-BO", this unit gives zero
output when the power is turned on; if the
Segment Display shows "N-BO", output is
turned on when the power is turned on.
P 2 0 2
2.7 Black-out Mode
2.8 Initialization
3. Tap the Fade+Speed button to change
between "N-BO" and "Y-BO".
4. Tap the Program button to leave this
mode.
All the programs are blank when this unit is packed. If you are not satisfied with
your programs, you can initialize this unit to clear all memory.
1. Turn the power off.
2. Press Program, Up and Fade+Speed buttons at a time while turning the power
on, this unit will be initialized and return to factory setting.
Summary of Contents for DMX-SOLO
Page 2: ......
