American DJ DMX-SOLO, User Manual

Page: 12 / 24

2.1.6 Change a Scene
2.1.7 Preview a Scene
2.1.5 Add a Scene
2.1.6 Change a Scene
2. Operation Guide 2. Operation Guide
9
10
NOTE: You must record scenes before and the program holds less
than 48 scenes.
NOTE: The program must record 48 scenes.
1. Repeat steps 1-3 in Delete a Scene.
1. Repeat steps 1-3 in Delete a Scene.
2. Tap the Program or Strobe button, the LED
near it lights indicating your selection.
1. Repeat steps 1-3 in Delete a Scene.
2. Tap the Up/Down button to select the scene
which you wish to add a new scene before.
2. Tap the Up/Down button to select the scene
you want to change.
3. Tap the Up/Down button to select the scene
you wish to preview.
4. Tap the Program or Strobe button again to
leave this mode.
3. Create a scene on your DMX controller, tap the
Record button, all LEDs flash briefly indicating
you've added a scene(step) into this program.
3. Create a scene on your DMX controller, tap the
Record button to change the step(scene), all
LEDs flash briefly indicating the old scene is
replaced by the new one.
2
2
2
2
2
NOTE: You must record scenes before you can preview the scenes.