background image

Read the instruction in this manual carefully and thoroughly, as they give important 

information regarding safety during use and maintenance. Keep this manual with 

the unit, in order to consult  it   in  the   future.  If the unit is sold or given to another 

operator, make certain that it always has its manual,    to enable  the new owner to 

read about its operation and  re lative instructions.

This unit is 

NOT

 intended for home use.

After having removed the packaging check that the unit is 

NOT

 damaged in any way. 

If in doubt, 

DON'T

 use it and contact an authorized dealer.

Packaging material (plastic bags, polystyrene foam, nails, etc.) 

MUST NOT

 be left 

within children's reach, as it can be dangerous.

This unit must only be operated by adults. 

DO NOT

 allow children to tamper or play 

with it.

NEVER

 use the unit under the following conditions:

        In places subject to excessive humidity.

        In places subject to vibrations or bumps.

           In places with a temperature of over 45  C

 or less than 2  C/35.6  F.

Protect the unit from excessive dryness or humidity (ideal conditions are between 

35% and 80%).

DO NOT

 dismantle or modify the unit.

DO NOT

 make any inflammable liquids, water or metal objects enter the unit.

Should any liquid be spilled on the unit, 

DISCONNECT

 the power supply to the unit 

immediately.

STOP

 using the unit immediately In the event of serious operation problems and 

either contact your local dealer for a check or contact us directly.

DO NOT

 open the unit--there are no user serviceable parts inside.

NEVER

 try to repair the unit yourself. Repairs by unqualified people could cause 

damage or faulty operation. Contact your nearest dealer.

/113  F

Features

General Instructions

Thank you for your purchase of this American DJ product.  
This DMX-Solo features include:

1

2

Warnings

Cautions

96 DMX channels

9 chase programs & a AP program

9 strobe programs & a AS program

Each chase/strobe program can record a maximum of 48 scenes

Either AS or AP program can record a maximum of 60 scenes

Each AS or AP scene enables to has its individual speed or fade time

Access the scenes from any DMX controller

A continuous cycle of Manual or Auto programs

All data can be swapped between two or more units

Built-in microphone for Music triggering

DMX polarity select

Power failure memory

Auto/Audio/Manual chase of programs

Summary of Contents for DMX-SOLO

























Reviews: