American DJ DMX-SOLO, User Manual

Page: 19 / 24

2. Operation Guide 2. Operation Guide
2.3.2 Audio Mode 2.3.3 Auto Mode
2.4 Speed Setting
16 15
2
2
1. Tap the Mode button several times until the
a dot LED
lights. near Audio
1. Tap the Mode button several times until both
Manual and Audio LEDs go out, that is, Auto
mode is active.
s 2 0 2
s 3 0 5
p 3 0 6
2 2 5
2. Tap the Program or Strobe button to select
chase program or strobe program.
3. Tap the Up/Down button to select the program
you wish to run.
2. Tap the Up/Down button to select the program
you wish to run.
3. Once the program is selected, the program will
run at the speed you've set before.
You can adjust the speed from 10 steps per
second to one step per 600 seconds.
4. Once the program is selected, the program will
be controlled by the music rhythms detected by
the built-in microphone.
1. Tap the Speed or Fade+Speed button to select
chase mode or fade mode, the LED above it
lights indicating your selection.
If the Speed LED lights, the scenes of the program
will sequence at the current speed.
If the Fade+Speed LED lights, the scenes of the
program will fade in at the speed.