![background image](http://html1.mh-extra.com/html/american-dj/accu-ufo/accu-ufo_user-instructions_2922649006.webp)
American DJ
®
- www.americandj.com - Accu UFO Instruction Manual Page 11
American DJ
®
- www.americandj.com - Accu UFO Instruction Manual Page 12
Accu UFO
System Menu
ADDRESS MENU -
AOO1 - A511
(Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX
(Test) - Tests the functions of each channel. There
are nine channels.
Note: Some channels cannot be tested.
PLAY MENU -
RUN
- Runs the unit as a “master” or in a stand alone mode. The
unit will run a internal program mode.
AUDI
(Audio) - Runs the unit as a “master” or in a stand alone,
sound active mode.
AUTO
- This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• “Hold” - This is the default setting, which in case the signal is
lost the fixute will “hold” at the last setting.
• “Close” - The fixture will return to its “home” standing.
• “Auto” - The fixture will go into Auto mode and run a pre-pro
-
grammed show.
• “Audi” - The fixture will go into Sound Active mode.
RESE (RESET) MENU -
ALL
- Resets all the motors in the unit.
SCAN
- Resets the motors that control pan/tilt.
TIME MENU -
LIFE
- Displays the fixtures total running time.
CLMT
- Clears the fixture running time.
RPAN (REVERSE PAN) MENU -
ON/OFF
- When “On” is chosen it will reverse the pan.
DEGR MENU -
360/540
- Switch the degree of the Pan between 360 and 540.
Accu UFO
System Menu
RTILT (REVERSE TILT) MENU -
ON/OFF
- When “On” is chosen it will reverse the tilt.
FINE MENU -
ON/OFF
- Switch between 8bit and 16bit movement.
MIC MENU -
M-01-M-70
- With this function you can make the internal mic
more or less sensitive to sound.
DISPLAY MENU -
VALU
(DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON
- Display will turn off in 2 minutes.
FLIP
- “Flips” the digital display 180º.
SPEC MENU -
RDMX
- Lets you adjust the DMX address via external controller.
SPEE
- Lets you select the movement mode.
DFSE
(Default Settings) - Resets the unit to the default settings.
FEED
- Pan/Tilt feedback (error correction) on/off.
VER
(Version) - Displays the software version
ADJU
- Calibration functions
EDIT MENU -
STEP
(S-01 - S-48) - These are the steps slots that you write
your programs into. There are at total of 48 steps. See edit pro-
gram.
SCXX
(SC01 - SC30) - These are the scenes that are stored in
your program. There are a total of 30 scenes.
REC
- This will auto save your custom program.
RUN
- This will run your custom program.