background image

American DJ

®

  -  www.americandj.com  - Accu UFO Instruction Manual Page 31

American DJ

®

  -  www.americandj.com  - Accu UFO Instruction Manual Page 32

 Accu UFO   

 

 

                           Operation

5.   Select a mode, and press ENTER to confirm.

6.   Press MODE/ESC if you want to return to the main menu.
7.   You can invert the pan and tilt functions in the system menu by 
 

 following the directions on page 16.

Master-Slave  Operation  (Sound  Active  or  Auto  Program): 

This function will allow you to link up to 16 units together and oper-
ate without a controller. The units can run a built-in program or run in 
sound actiive mode. In Master-Slave operation one unit will act as the 
controlling unit and the others will react to the controlling units pro-
grams. Any unit can act as a Master or as a Slave.
1.   Using standard XLR microphone cables, daisy chain your units  
 

together via the XLR connector on the rear of the units. Remem- 

 

ber the Male XLR connector is the input and the Female XLR    

 

connector is the output. The first unit in the chain (master) will use  

 

the female XLR connector only - The last unit in the chain will use  

 

the male XLR connector only. For longer cable runs we suggest a  

 

terminator at the last fixture.

2.  Access the main menu.
2.  Tap the UP button until 

PLAY

” is displayed, and Press ENTER.

3.  

Tap the UP button to choose between “

RUN

” or “

AUDI

”. “

RUN

” will  

      make the units run through a built-in program. “

AUDI

” will make  

      the units sound active.
4.   Press the UP or DOWN buttons to select “

MAST

” and press    

      ENTER to confirm.

5.   Press MODE/ESC if you want to return to the main menu
6.   You can invert the pan and tilt functions in the system menu by 
 

 following the directions on page 16.

  Channel     Value 

 

       Function

       

1               0 - 255                  PAN MOVEMENT 8bit 

       2               0 - 255                       PAN FINE 16bit   
       3               0 - 255                  TILT MOVEMENT 8bit  
       4               0 - 255                       TILT FINE 16bit
       5                                   SPEED OF PAN/TILT MOVEMENT
                         0 - 255                          MAX - MIN      
       6                                      LENS INDEXING & ROTATION
                         0 - 3                          LENS INDEXING
                         4 - 127             FOWARD LENS ROTATION 
                                                             FAST - SLOW
                     128 - 131                        NO ROTATION
                     132 - 255           BACKWARD LENS ROTATION
                                                             SLOW - FAST
       7                                                   LED EFFECTS
                         0 - 10                            BLACKOUT
                       11 - 20                                  RED
                       21 - 30                                GREEN
                       31 - 40                                  BLUE
                       41 - 50                                 WHITE
                       51 - 60                          RED + GREEN
                       61 - 70                            RED + BLUE
                       71 - 80                           RED + WHITE
                       81 - 90                         GREEN + BLUE
                       91 - 100                      GREEN + WHITE
                     101 - 110                        BLUE + WHITE
                     111 - 120                 RED + GREEN + BLUE
                     121 - 130                RED + GREEN + WHITE
                     131 - 140                  RED + BLUE + WHITE
                     141 - 150               GREEN + BLUE + WHITE
                     151 - 160         RED + GREEN + BLUE + WHITE
                     161 - 170                    AUTO PROGRAM 1
                     171 - 180                    AUTO PROGRAM 2                    

  Accu UFO   

 

 

                          DMX Traits 

Summary of Contents for Accu UFO



















Reviews: