American DJ
®
- www.americandj.com - Accu UFO Instruction Manual Page 24
American DJ
®
- www.americandj.com - Accu UFO Instruction Manual Page 23
Accu UFO
Editing Program
EDIT
- This menu item allows you to write a program into the
memory (EEPROM) via the control panel or via the external
controller.
Please see pages 25-27 for detailed instructions.
STEP
-
With this function you can program the number of
steps in your individual Program.
1. Access the main menu.
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
3. Tap the UP button until “
STEP
” is displayed, press ENTER.
4. The display shows “
S-01
”, this stands for the first step of
your program. You can call up to 48 scenes in “Run”. For exam
-
ple, if “
S-05
” is displayed, it means that “Run” will run the first
5 scenes you saved in “Edit”.
5. Press ENTER to save and press MODE/ESC to exit.
SC01
-
With this function you can choose the number of
scenes in your Program.
1. Access the main menu.
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
3. Tap the UP button until “
SC01
” is displayed.
4. The display shows “
SC01
”, this stands for the first scene of
your program. You can call up to 48 scenes. For example, if
“
SC05
”, it means that “Run” will run the first 5 scenes you saved
in “Edit”.
5. Press ENTER to save and press MODE/ESC to exit.
REC
-
With this function you can record the scenes auto-
matically for the external controller.
1. Access the main menu.
Accu UFO
Editing Program
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
3. Tap the UP button until “
REC
” is displayed.
4. The display shows “
RE.XX
”, “XX” stands for the scene
number in the internal memory of where your scenes from the
controller will be stored.
5. Press the UP or DOWN button to select your desired scene
number.
6. Press ENTER to confirm, and the fixture will record the
scenes from the external controller.
7. Press MODE/ESC to return to the main menu.
RUN
With the function “RUN”, you can run your pre-made
program. You can set the number of steps under Step (S-01
- S-48). You can edit the individual scenes under Edit.
1. Access the main menu.
2. Tap the UP button until “
EDIT
” is displayed, press ENTER.
3. Tap the UP button until “
RUN
” is displayed, press ENTER.
4. “
AUTO
” is displayed. If you press the UP button it will show
“
SOUN
”. Select which one you want to activate, and press
ENTER.
5. Press UP, to select “
ALON
” or “
NAST
”. Which mean stand
alone, and master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
