300Mbps Wireless Access Point
22
channel of the last added device as the bridge channel (You can
also change the channel according to your needs. All the devices
must at the same channel, so the bridge can be established.)
4.1.2.3 Wireless Repeater Mode
Repeater Mode can repeat and amplify wireless signals to extend
wireless network coverage. In this mode, wireless clients are allowed to
connect.
When two LAN’s transmission distance is over the wireless device’s
maximum transmission value, or there is to much interference among
devices, you can use the Repeater mode to deal with these problems by
adding MAC addresses. The topology shows below:
Select wireless repeater on the drop-down box of WDS mode and the
page will show as below.
