Amer WAP123N User Manual Download Page 5

Page: 5 / 59

300Mbps Wireless Access Point

Chapter 1 Product Overview

WAP123N is a wireless Access Point based on the latest IEEE802.11n

standard while at the same time being backwards compatible with

IEEE802.11b/g devices. Adopting the advanced “Multiple in and Multiple

out” (MIMO) technology, it can provide a maximum of 300Mbps stable

transmitting rate for wireless users. With appropriate Power over

Ethernet (POE) support, you only need to run one cable to the AP to

deliver both data and power. Ceiling mounted design and POE

technology make it couldn't be easier for family, enterprise, and hotel

users to extend wireless networks indoors.

Wireless AP and WDS working modes support wireless AP, wireless

Repeater, wireless Point-to-Point (P2P) Bridge, and wireless

Point-to-Multipoint (P2MP) Bridge functions. Firstly, it can be used as a

wireless Hot Spot to enable the accesses of wireless users when in AP

mode. Secondly, it can be used as a Bridge to connect two or more

wired networks when it is in P2P or P2MP mode. Thirdly, it can also be

used as a wireless Repeater to expand your wireless network coverage

area.

Furthermore, 64/128-bit Wired Equivalent Privacy (WEP), WPA-PSK,

WPA2-PSK, WPA&WPA2, 802.1X Authentication, and MAC Address

filter are all supported to protect your data and privacy. Gigabit LAN port

provides you higher LAN transmission rate. SNMP and Web-based

management interface make configuration easier than ever.

Summary of Contents for WAP123N




























































Search results

Summary of Contents for WAP123N

Reviews:

Related manuals for WAP123N

Brands by name

Popular brands

Amer WAP123N, User Manual

Search results

Summary of Contents for WAP123N

Reviews:

Related manuals for WAP123N

Brands by name

Popular brands