AMD Confidential
User Manual
September 12
h
, 2008
138
Chapter 9: Logging
Figure 9-1: Message Log
The left-hand window lists all of the currently loaded modules. The user may individually
enable or disable logging from a given module by using the checkbox next to the
module's name. In addition, the user may configure module-specific logging options by
double-clicking on the module name.
The top-right window contains three checkboxes which allow the user to control whether
messages are displayed in the log window, written to a file, or logged to the AMD
SimNow console. The bottom right window is used to display the informational message
if the "
Log to Window
" option is selected.
To open the log file the first time a simulation is started, check the "
Log To File
" box is
checked. The log file will remain open until one of the following events occurs:
The BSD is closed or the simulator program terminates.
The simulation is stared with the "
Log To File
" box unchecked.
The simulation is started with a new log-file name specified.