62
Using Global Setup
Global setup is a great tool to use to calibrate a detection area. This helps to increase the overall accuracy of the
IVS rules being used as well as validate their It is highly recommended to use global access setup before setting up
multiple IVS rules.
1. Open the
Global Setup
tab located in the IVS menu.
2. Click on the
Add Calibration
button to set a detection area.
3. Left click on the live monitoring screen and draw your custom detection area. The detection area must be a
closed area.
4. Click on
Add Rulers
to add your initial calibration ruler to the detection area. Draw a vertical line in the detection
area. Each vertical line must be separately drawn. You can add up to 3 vertical calibration lines Left click on the live
monitoring screen to set the vertical rulers.
5. Click on the
Horizontal
ruler radio button and click
Add Rulers
. Draw a horizontal line in the detection area. Only
one horizontal line can be used in the detection area. Left click on the live monitoring screen to set the horizontal
ruler.
6. Click
Save
to save the detection area and calibration rulers.
To verify the width and height accuracy of the detection area you can use the weight and height verification
options via the dropdown box. To begin, choose your verification method from the dropdown menu and click on
the
Calibration Validation
button. Left click on the live monitoring screen and draw a vertical or horizontal line to
verify the calibration. The line drawn will be the width or height of the area set in meters.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
People Counting
People Counting is used to provide a statistic based up the number of people who enter and exit a certain area on
the live view screen.
