58
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
Setting a Missing Object Rule
1. Select Missing Object from the Rule Type menu. Set a name for the rule by double clicking the mouse over the
Name of the rule.
2. Click on
Setup
to set a schedule, set your periods (if any) and click
Save
to continue.
3. In the
Duration
menu, type in the number of seconds you would like to have before an abandoned object
triggers an event. For best results, it is recommended to keep this option as default (10 seconds).
4. Enable the
Record
checkbox to record the event.
5. Set the number of seconds the event will be delayed in between triggers. It is recommended to leave this as
default.
6. Enable the
Send Email
and
Snapshot
checkboxes if you would like a snapshot of the event emailed to you. A
valid Email address must be established in the camera prior to enabling this setting.
7. Click the
Draw Rule
option and right click on the live monitoring screen. Use the mouse to draw your initial line.
Once the initial line is set, right click the mouse again to continue drawing the region around the object. Repeat the
process and left click the mouse to complete the region. Right click on the live monitoring screen when finished to
set the rule.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
