manualshive.com logo in svg

AMCI SMD34K, User Manual

The AMCI SMD34K User Manual is an essential guide designed to assist users in setting up and operating the AMCI SMD34K product. Download this detailed, comprehensive manual free of charge from our website manualshive.com, ensuring you make the most of your product's features and capabilities.

Share
Download
background image

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254  Fax: (860) 584-1973  http://www.amci.com

SMD34K User Manual

SMD34K S

PECIFICATIONS

13

Conformance Markings

The SMD34K devices meet the requirements for the following conformance markings when installed and 
operated in accordance with the instructions contained in their product documentation.

CE

Directive 2014/30/EU of the European Parliament and of the Council (EMC), of 26 February 2014 on 
the harmonisation of the laws of the Member States relating to electromagnetic compatibility; per EN 
61800-3:2004/A1:2012.

Directive 2014/35/EU of the European Parliament and of the Council (Low Voltage), of 26 February 
2014 on the harmonisation of the laws of the Member States relating to the making available on the 
market of electrical equipment designed for use within certain voltage limits; per EN 61010-1:2010.

RoHS

Directive (EU) 2015/863 (RoHS 3) and Directive 2011/65/EU (RoHS 2)

Indexer Functionality

The table below lists the functionality offered by the indexer built into the AMCI SMD34K units.    

Table R1.1  Indexer Functionality

Feature

Description

Synchronous 

Moves

Using the Distributed Clock functionality of the EtherCAT system, multiple devices 
can synchronize the start of their moves to the SYNC0 signal. Moves will begin 
within ±25 microseconds of each other.

Programmable 

Inputs

Each of the inputs can be programmed as a Home Limit, Over Travel Limit, Capture 
Input, Manual Jog Stop, Start Indexer Move, E-Stop, or a General Purpose Input.

Programmable 

Parameters

Starting Speed, Running Speed, Acceleration, Deceleration, and Accel/Decel Types 
are fully programmable.

Homing

Allows you to set the machine to a known position. An SMD34K homes to a discrete 
input and can use a bit in the Network Data as a home proximity input.

Jog Move

Allows you to drive the motor in either direction as long as the command is active.

Relative Move

Allows you to drive the motor a specific number of steps in either direction from the 
current location.

Absolute Move

Allows you to drive the motor from one known location to another known

location.

Registration Move

Allows you to jog the motor in either direction based on a command from your host 
controller. When a controlled stop is issued, the move will output a programmable 
number of steps before coming to a stop.

Blend Move

Allows you to perform a sequence of relative moves without stopping between them.

Dwell Move

Allows you to perform a sequence of relative moves with a stop between each move 
that has a programmable length of time. Used to create highly accurate move profiles 
that avoid network latency issues.

Indexer Move

Allows you to program a move that is held in memory. The move is run when one of 
the programmable inputs makes a transition.

Hold Move

Allows you to suspend a move, and optionally restart it, without losing your position 
value.

Resume Move

Allows you to restart a previously held move operation.

Immediate Stop

Allows you to immediately stop all motion if an error condition is detected by your 
host controller.

Stall Detection

When an SMD34K is purchased with an encoder option, the encoder can be used to 
verify motion when a move command is issued.

Summary of Contents for SMD34K





































































































Reviews:

No comments

Related manuals for SMD34K

jbc DI Series Manual preview
DI Series
Brand: jbc Pages: 4
Lawler 410 Installation & Maintenance Manual preview
410
Brand: Lawler Pages: 4
ZEHUS Controller Rider'S Manual preview
Controller
Brand: ZEHUS Pages: 28
Valfonta S3 Operation And Installation Instructions Manual preview
S3
Brand: Valfonta Pages: 12
VADDIO EVI-D70 Installation And User Manual preview
EVI-D70
Brand: VADDIO Pages: 2
B&G WR10 Quick Reference Manual preview
WR10
Brand: B&G Pages: 2
B&K SR10.1 Operation Manual preview
SR10.1
Brand: B&K Pages: 9
National Instruments NI 9514 User Manual preview
NI 9514
Brand: National Instruments Pages: 72
National Instruments NI 9514 Operating Instructions And Specifications preview
NI 9514
Brand: National Instruments Pages: 41
NAPCO MAGNUM ALERT 3000 FIRE ALARM Basic Operating Instructions preview
MAGNUM ALERT 3000 FIRE ALARM
Brand: NAPCO Pages: 2
Vag CEREX 300-L Operation & Maintenance Instructions Manual preview
CEREX 300-L
Brand: Vag Pages: 15
Inkel IRG-8116 Operation Manual preview
IRG-8116
Brand: Inkel Pages: 12
McIntosh MHT200 Service Manual preview
MHT200
Brand: McIntosh Pages: 60
Ruida Technology RDLC320 User Manual preview
RDLC320
Brand: Ruida Technology Pages: 45
Kohzu Precision RC-010 Manual preview
RC-010
Brand: Kohzu Precision Pages: 58
SAFERA PCU6.1-F User And Installation Manual preview
PCU6.1-F
Brand: SAFERA Pages: 32
Oriental motor ASD10A-K Operating Manual preview
ASD10A-K
Brand: Oriental motor Pages: 52
Opt OPT-DPA1024E-4 Manual preview
OPT-DPA1024E-4
Brand: Opt Pages: 40

Brands by name

Popular brands

Load more brands