1
2
DIP SWITCH
3
4
FUNCTION
DOWN
DOWN
DOWN
DOWN
UP
UP
UP
UP
---
---
DOWN
DOWN
UP
UP
DOWN
DOWN
UP
UP
---
---
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
---
---
Table 1
---
---
---
---
---
---
---
---
DOWN
UP
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
°F
°C
5. Insert two AAA batteries.
6. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and
then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting
data.
7. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are
on the display, as shown in Figure 3.
Figure 3
(1)
temperature
(2) temperature units (
°F vs. °C)
(3) channel number
(4) relativehumidity
8. Close the battery door. Make sure the gasket (around the battery compartment) is properly
seated in its trace prior to closing the door. Tighten the set screw.
Version 1.0
©Copyright 2014, Ambient LLC. All Rights Reserved.
Page
4