to view the actual color.
Note: Reference
Section 7.5 Personalizing Color Ranges
to modify the color changes to best
suit your comfort level and location.
15.
Backlight Contrast
: Press the
SET
key again to change the backlight brightness (the
BRIGHT
icon will be displayed). Press the [+] key or [
-
] key to adjust the backlight
contrast from 1 (dim) to 8 (bright).
5.3 Chanel Selection
Press the
C
button to switch the display between remote sensors 1 through 8, and
scroll mode
. In scroll mode, all of the indoor and detected outdoor sensors will be displayed
in five second intervals.
5.4 Sensor Search Mode
If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To
reacquire the signal:
1. If a specific channel is lost, press the
CH/+
button to display this channel, then Press and
hold the
CH/+
button for
3
seconds, and the remote search icon
will be constantly
displayed for up to 3 minutes. Once the signal is reacquired, the remote search icon
will turn off, and the current values will be displayed.
2. If new sensors are added, subtracted, or multiple sensor channels are lost, Press and hold
the
CH/+
button for
5
seconds (on any channel), and the remote search icon will be
constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote
search icon
will turn off, and the current values will be displayed.
5.5 History Graph Mode
The historical graph on the display changed to display the measured parameters.
In normal mode, press the
HISTORY/- key
to toggle between:
•
the barometer graph (the
BAROREL
icon is displayed),
•
indoor temperature graph (the
TEMP-IN
icon is displayed)
•
indoor humidity graph (the
HUMI-IN
icon is displayed)
•
outdoor temperature graph (the
TEMPOUT
icon is displayed)
•
outdoor humidity graph (the
HUMIOUT
icon is displayed)
5.6 Reset Min/Max record
If you own more than one remote sensor, press the
C
button first to display the
specific channel you wish to clear.
Version 1.0
©Copyright 2014, Ambient LLC. All Rights Reserved.
Page
13