6 Alarm Mode
The WS-11 includes time alarm, temperature alarm and humidity alarm features for indoor and
Channel 1.
6.1 Alarm Operation
When an alarm condition is exceeded, the alarm icon will flash (visual) and the alarm beeper
will sound (audible). To silence the beeper, press any key. The alarm beeper can be permanently
silenced by referencing Section 6.4.
6.2 Alarm Settings
Time of day, indoor and channel 1 alarms are supported. Channels 2-8 alarms are not supported.
To view the current alarm settings, press the
ALARM
key to enter the alarm mode.
6.3 Setting the Alarms
To set the alarms, press and hold the
SET
key for three seconds. The alarm parameter will begin
flashing. To adjust the alarm parameter, press the [+] or [-] key to increase or decrease the alarm
setting slowly, or press and hold the [+] or [-] key for three seconds to increase or decrease the
alarm setting rapidly.
Press the
ALARM
key to turn on (the alarm icon will appear ) and off the alarm.
To save the alarm setting and proceed to the next alarm parameter, press (do not hold) the
SET
key.
After 30 seconds of inactivity, the alarm mode will time out and return to normal mode.
The following is a list of the individual alarm parameters that are set (in order):
1. Alarm
hour
2. Alarm
minute
3. Indoor temperature high alarm
4. Indoor temperature low alarm
5. Indoor humidity high alarm
6. Indoor humidity low alarm
7. Outdoor 1 (channel 1) temperature high alarm
8. Outdoor 1 (channel 1) temperature low alarm
9. Outdoor 1 (channel 1) dew point high alarm
10. Outdoor 1 (channel 1) dew point low alarm
11. Outdoor 1 (channel 1) humidity high alarm
Version 1.0
©Copyright 2014, Ambient LLC. All Rights Reserved.
Page
17
