same location (about 5 to 10’ apart). The sensors should be within 3°F (the accuracy is ± 2°F).
Allow about 30 minutes for both sensors to stabilize. The temperature can be adjusted or
calibrated later to match each other or a known source.
3 Remote Sensor Installation
It is recommended you mount the remote sensor outside in a shaded area. A north facing wall is
preferred because it is in the shade most of the day. Direct sunlight and radiant heat sources will
result in inaccurate temperature readings. Although the sensor is water resistant, it is best to mount
in a well protected area, such as under an eve. Use a screw or nail (not included) to affix the
remote sensor to the wall, as shown in Figure 7.
Figure 7
4 Display Features
4.1 Comfort Icon
The comfort icon is based on humidity ranges specified in Figure 8. The icon is displayed for
indoor humidity, remote channel 1 humidity and optional remote channels 2 through 8 humidity.
RH<45%
Dry
RH 45%~65%
Comfortable
Figure 8
RH >65%
Wet
Version 1.0
©Copyright 2014, Ambient LLC. All Rights Reserved.
Page
8
