Ambiano KLFP3B, User Manual

Page: 13 / 60

13
Helpful Tip : ALWAYS install the bowl and knife blade attachment onto the base before
adding ingredients.
4. Place the lid onto the bowl, and turn the lid
counterclockwise (i.e., left) until it locks into
the bowl, ensuring the raised locking tab on
the lid faces the release lever on the handle
of the bowl. As shown in Figure E, the arrows
on the handle and lid will help you properly
align the interlock mechanism. DO NOT force
the lid into position.
Note : The lid must be properly locked into the correct position, and the arrows must be
aligned, or the unit will not turn on.
Danger of personal injury due to improper use .
DO NOT use the lid to operate the 3 Cup Food Processor; always use the speed control
knob to turn the unit on/off.
5. Insert the power plug into the electrical outlet; the food processor is now ready for
use.
Danger of being cut due to improper handling .
The reversible plate attachment is extremely sharp; use caution
and handle with care.
1.
Place the power base on a stable, level surface. Verify
that the speed control knob is turned to the
OFF
position,
and that the power cord is unplugged from the electrical
outlet.
2. Attach the food processing bowl to the base.
3. As shown in Figure F, fit the plate carrier over the drive
shaft before assembling the reversible plate attachment.
4. The reversible plate features a shredding and slicing
plate. Choose a side, and then fit the reversible plate
attachment onto the plate carrier with the appropriate
side facing upward towards the feed tube. The stem of
the plate carrier must align with the crosshairs of the
plate carrier. ALWAYS handle the reversible plate
attachment by the rim; avoid touching the sharp cutting
blades.
Reversible Plate Attachment
Assembly
F
E