Ambiano KLFP3B, User Manual

Page: 17 / 60

17
fill the width of the feed tube (i.e., avoid cutting the food too small) to prevent the food
from turning or tilting sideways during processing. When slicing thinner vegetables, cut
them just short of the length of the feed tube, and then insert them vertically into the
tube so they cannot turn or tilt.
Use
Operation
Danger of personal injury or damage to food processor due to improper use .
The 3 Cup Food Processor is not suitable for processing, crushing or grinding coffee
beans, spices, frozen foods, ice, cereals, rice or converting granulated sugar to caster
sugar. In addition, DO NOT process boiling liquids or thin liquids such as water or milk.
1. Assemble the food processor using either the knife blade or reversible plate
attachment.
2. For the knife blade attachment, add the ingredients or food to be processed into
the bowl. DO NOT exceed the recommended maximum quantities of the bowl; the
bowl is marked with maximum dry and liquid quantities to prevent overloading.
Helpful Tip : For best results, cut food into smaller pieces that are similar in size, up to
¾-inch cubes. When chopping herbs, ensure they are as dry as possible. Additionally,
remove seeds, pits and cores from hard fruits or vegetables.
3. For the reversible plate attachment, select the desired plate and fit it onto the
plate carrier with the cutting side facing upwards toward the feed tube. ALWAYS
handle the reversible plate by the rim; avoid touching the sharp cutting blades. If
necessary, cut pieces of food to fit the feed tube. When using the shredding plate,
fill the feed tube almost to the top. When using the slicing plate, pack the food in
an upright position inside the feed tube; the height of the food should be slightly
shorter than the feed tube.
Helpful Tip : When slicing or shredding, food placed upright is cut shorter than food
placed horizontally. Additionally, remove seeds, pits and cores from hard fruits or
vegetables.
4. Ensure the food processor is plugged in. The food processor will not start if the
bowl and the lid are not properly aligned and locked into the power base.
5. DO NOT use the food processor without either the knife blade or the reversible
plate (with the slicing or shredding disc) attachments installed.
Helpful Tip : To prevent food or liquids from spilling out, leave the food pusher inside
the feed tube when not in use.
6. Use the speed control knob to select a speed:
LOW
,
HIGH
, or
PULSE
Helpful Tip : The food processor will not work if both the bowl and lid are not aligned
properly.