Amazone ZG-B 5500 Drive, Operating Manual, Page: 76 / 176

Structure and function
5.23 Stand
Raising the stand after coupling
1. Wind up the stand (Fig. 54/1) to the limit
stop using the hand crank (Fig. 54/2).
2. Pull the pins (Fig. 54/3) out of the stand.
3. Raise the stand.
4. Insert the pins in the lower hole (Fig. 54/4)
and secure them.
Lowering the stand before coupling
1. Hold the inside of the stand steady and pull
the pins (Fig. 54/3) out of the stand.
2. Lower the stand.
3. Insert the pins in the upper hole and secure
them.
4. Wind down the stand (Fig. 54/1) to the limit
stop using the hand crank (Fig. 54/2) until
the load is relieved from the yoke bar.
Fig. 54
Fig. 55
Fig. 56
The stand with crank has a fast and
slow gear (Fig. 55).
•
Pull out manual crank –
fast gear for stand.
•
Push in manual crank –
slow gear for stand (high loads).
After operating the crank, swivel the
hand lever upwards as in Fig. 56.
76
ZG- B
BAG0003.18 01.19