Amazone ZG-B 5500 Drive, Operating Manual, Page: 15 / 176

General safety instructions
2.8 Danger from residual energy
Note that there may be residual mechanical, hydraulic, pneumatic and
electrical/electronic energy on the machine.
Use appropriate measures to inform the operating personnel. You can
find detailed information in the relevant sections of this operating
manual.
2.9 Maintenance and repair work, fault elimination
Carry out prescribed setting, maintenance and inspection work in
good time.
Secure all media such as compressed air and the hydraulic system
against unintentional start-up.
Carefully fix and secure larger subassemblies to lifting gear when
carrying out replacement work.
Schraubverbindungen regelmäßig auf festen Sitz kontrollieren und
gegebenenfalls nachziehen.
Nach Beendigung der Wartungsarbeiten Sicherheitseinrichtungen auf
Funktion überprüfen.
2.10 Design changes
You may make no changes, expansions or modifications to the ma-
chine without the approval of AMAZONEN-WERKE. This is also valid
when welding support parts.
Any expansion or modification work shall require the written approval
of AMAZONEN-WERKE. Only use the modification and accessory
parts released by AMAZONEN-WERKE, so that the type approval
remains valid according to the national and international regulations.
Vehicles with an official type approval or with equipment connected to
a vehicle with a valid type approval or approval for road transport
according to the German road traffic regulations must be in the state
specified by the approval.
WARNING
Risk of contusions, cuts, dragging, catching or knocks from
support parts.
It is forbidden to:
•
Drill holes in the frame or on the running gear.
•
Increase the size of existing holes on the frame or the running
gear.
•
Weld support parts.
ZG-B
BAG0003.18 01.19
15