Commissioning
6.4
Fitting wheels
If the machine is fitted with inflatable spare tyres, running wheels must
be fitted before putting into operation.
To assemble the wheels, use:
(1) conical rings in front of the wheel nuts.
(2) only rims with a fitting countersink for the conical ring.
WARNING
Wheel rims that are suitable for the tyres used must have a rim
that has been fully welded all the way round.
1. Lift machine slightly using lifting crane.
DANGER
Use the attachment points marked for lifting belts.
See also "Loading" section, page 34.
2. Loosen wheel nuts on the inflatable spare tyres.
3. Remove inflatable spare tyres.
CAUTION
Take care when removing the inflatable spare tyres and putting
the running wheels in place.
4. Place the running wheels on threaded bolts.
5. Tighten wheel nuts.
Required tightening torque for wheel nuts: 510 Nm.
6. Lower machine and remove lifting belts.
7. After 10 hours of operation, tighten the wheel nuts.
106
ZG-
B
BAG0003.18 01.19
Summary of Contents for ZG-B 5500 Drive
Page 19: ...General safety instructions Fig 3 Fig 4 ZG B BAG0003 18 01 19 19...
Page 176: ......