Use of the machine
•
For new machines, after 3-4 full hopper loads, check that the
screws are tight and retighten if necessary.
•
Use only fertiliser with the proper grain size, of the kinds listed in
the setting chart. If the type of fertiliser is not known exactly,
check the working width using the mobile fertiliser test rig.
•
When spreading mixed fertilisers, note the following:
ο
Each variety may have different flight characteristics.
ο
The individual varieties may separate.
•
After ever use, remove any fertiliser clinging to the spreading
vanes.
ZG-B Drive,
before starting with the spreading operation:
•
Job-data
•
Machine-data
Enter on AMATRON 3 and recheck.
See operation manual of AMATRON 3!
Put the implement in working position:
•
Adjust the main shutter.
ZG-B Drive
:
•
Put the TrailTron draw bar in operating position (stop tap in posi-
tion
I
), see page 80.
ZG-B Super
:
•
Put the ground wheel drive in operating position.
•
The fertiliser spreader is coupled to the tractor.
•
The supply hoses are connected.
•
The PTO-shaft is connected.
•
The settings have been configured.
ZG-B
BAG0003.18 01.19
137
Summary of Contents for ZG-B 5500 Drive
Page 19: ...General safety instructions Fig 3 Fig 4 ZG B BAG0003 18 01 19 19...
Page 176: ......