Amazone Pantera 4504, Operating Manual

Page: 235 / 286

Cleaning, maintenance and repair
Pantera 4504 CP plus BAG0230.2 07.21 235
Installation and removal of hydraulic hose lines
When installing and removing hydraulic hose lines, always observe
the following information:

Use only genuine AMAZONE replacement hoses.

Ensure cleanliness.

You must always install the hydraulic lines so that, in all states of
operation:

There is no tension, apart from the hose's own weight.

There is no possibility of jolting on short lengths.

Outer mechanical influences on the hydraulic hose lines
are avoided.
Use appropriate arrangements and fixing to prevent any
scouring of the hoses on components or on each other. If
necessary, secure hydraulic hose lines using protective co-
vers. Cover sharp-edged components.

The approved bending radii may not be exceeded.

When connecting a hydraulic hose line to moving parts, the hose
length must be appropriate so that the smallest approved bend-
ing radius is not undershot over the whole area of movement
and/or the hydraulic hose line is not overtensioned.

Fix the hydraulic hose lines at the specified fixing points. There,
avoid hose clips, which impair the natural movement and length
changes of the hose.

The coating of hydraulic hose lines is not permitted.