Transportation
60
Catros02-T BAG0078.3 03.14
WARNING
Risk of damage during operation, insufficient stability and insuf-
ficient tractor steering and braking power when tractor is im-
properly used!
These risks may pose serious injuries and/or death.
Observe the permissible axle and drawbar loads of the tractor.
WARNING
Risk of falling from the implement if riding against regulations!
It is prohibited to ride on the implement and/or climb on the imple-
ment.
9.1
Converting from operational to transport position
The disk rows must each be locked in the trans-
port position by means of a ratchet on the left
and right of the implement.
1. Lower the implement.
2. Pull the tractor release cord.
3. With the implement lowered, reverse a little
on the field.
Move the disk rows to the transport position.
4. Let go of the release cord.
The disk rows lock in the transport position.
5. Check the locking of the disk rows.
Disk rows locked:
Fig. 29 - Right implement side, position A.
Fig. 30 - Left implement side
6. Raise the implement.
7. Clean the tools.
Catros 4002-T
The transport position corresponds to the
operational position! No conversion is necessary!
This implement is very wide!
Pay attention to your local regulations
for road transport!
Fig. 29
Fig. 30
Summary of Contents for Catros 3002-T
Page 75: ...Catros02 T BAG0078 3 03 14 75 ...
