Connecting and Disconnecting the Implement
Catros02-T BAG0078.3 03.14
53
1. Attach the ball sleeves over the lower link pins of the implement.
2. Secure the implement from unintentional disconnection using
linchpins for the upper and lower link pins.
3. Direct people away from the danger area between the tractor
and implement before approaching the implement with the trac-
tor.
4. First connect the supply lines before connecting the implement
to the tractor.
4.1 Drive the tractor towards the implement leaving approxi-
mately 10 inches [25 cm] between the tractor and imple-
ment.
4.2 Secure the tractor from unintentionally starting and rolling
away.
4.3 Connect the supply lines to the tractor.
4.4 Position the lower link hooks so that they are aligned with
the lower linking points on the implement.
5. Now, reverse the tractor all the way to the implement so that the
lower link hooks of the tractor automatically pick up the ball
sleeves of the lower attachment points of the implement.
The lower link hooks lock automatically.
6. From the tractor seat, connect the upper link to the top attach-
ment point of the three-point attachment frame using the upper
link hook.
The top link hook locks automatically.
7. Remove the wheel chocks.
Country-specific regulation for implements without brake sys-
tems:
8. Fasten the safety chain to the tractor as required.
Summary of Contents for Catros 3002-T
Page 75: ...Catros02 T BAG0078 3 03 14 75 ...
