Structure and Function
40
Catros02-T BAG0078.3 03.14
5.3
Two-row disk harrow
The concave disks (Fig. 12/1) are arranged
offset to the direction of travel by an angle of 17°
at the front and 14° at the rear.
The mounting of the concave disks (Fig. 12/2)
consists of a two-row angular contact ball
bearing with slide seal and oil filling and is
maintenance-free.
The following are adjustable:
The offsetting of the two disk rows, which
can be coordinated via the offset slide with
regard to working depth and speed.
Adjustment is made with the
AMAZONE
eccentric pins.
The working intensity of the disks via the
working depth. The depth setting takes
place
mechanically on the frame using
spacer elements.
The two outside discs are adjustable in
vertical direction to prevent dam or
furrow formation
Fig. 12
The elastic rubber sprung suspension of the
individual disks enables:
adaptation to soil unevenness
disks evade hard obstacles when encoun-
tered, e.g. stones
This protects the individual disks against
damage.
Fig. 13
Catros 3002-T
/
3502-T
:
To achieve the transport width, the disk rows
must be locked in the transport position.
They are locked and unlocked via a pull / release
cord from the tractor.
The disk rows are locked when the locking pawls
(Fig. 14/1) on the left and right of the disk rows
enclose the round steel (Fig. 14/2).
Fig. 14/...
(1) locking pawl
(2) round steel
(3) indicator
(4) pull / release cord
Fig. 14
Summary of Contents for Catros 3002-T
Page 75: ...Catros02 T BAG0078 3 03 14 75 ...
