Adjustments
66
Catros BAG0053.14 10.17
Fine adjustment is carried out by rotating the
eccentric pin (Fig. 41) from position 1 to position
4.
1. Release the clip pin.
2. Turn the eccentric pin (position 1-4).
3. Secure the clip pin.
Fig. 43
The work pattern must be checked by viewing
the cultivated horizon behind the implement:
(1) Cutting edge 1st disk row
(2) Cutting edge 2nd disk row
•
Fig. 42
:
Correct setting of disk rows.
•
Fig. 43
:
Adjust 1st disk row to right and check again.
•
Fig. 44
:
The cutting edge of the 2nd disk row is not
visible and follows the 1st disk row. Adjust
1st disk row to left.
Fig. 44
Fig. 45
Fig. 46
8.3
Working depth of the outside disks
The outside disks on the front right and rear left
may be adjusted.
Use the bearing pin and hub as handle.
1. Secure the tractor against unintentional
starting and/or rolling away.
2. Loosen the tension bolts (Fig. 45/1).
3. Adjust the outside disks in the slotted hole
so that no furrow is formed during use.
4. Retighten the tension bolts.
Fig. 47
