Adjustments
Catros BAG0053.14 10.17
65
8.2
Offset disk rows
The offset disk rows are adjusted as necessary
by means of an
AMAZONE
eccentric pin.
6 insertion holes are available for this purpose.
(Fig. 39).
1. Move the implement backwards while in
working position.
→
The disk rows are displaced so that the
insertion holes are uncovered.
2. Secure the tractor and implement against
unintentional starting and/or rolling away.
3. Release clip pins (Fig. 39/1 and Fig. 40/1).
4. Rotate eccentric pins (Fig. 39/2 and Fig.
40/2) to the desired setting and insert.
5. Secure the clip pin.
Fig. 40
CAUTION
Crushing hazard between eccentric
pin and stop of disk row!
Fig. 41
•
The recommended insertion hole
is marked with an arrow (Fig.
39/3).
Catros
+
: Preferential insertion
hole one place further to right.
•
Catros -2 have one possible disk
offset setting for each wing (Fig.
40):
→
Select the same insertion holes
on left and right!
Hydraulic adjustment of the disc gang offset (optional)
The offset of the disc gangs can be adjusted
using the
beige
tractor control unit.
Fig. 42
