Use of the Implement
10.2
On the field
WARNING
Frame damage due to faulty switching of the tractor control
units.
During work, the following tractor control units must operated
in float position:
•
Green 1 / 2
tractor control unit.
•
Blue tractor control unit
Hydraulic working depth adjustment:
For a uniform working depth across the entire implement width, the
corresponding hydraulic cylinders must have the same length.
Before operation, synchronise the hydraulic cylinder for depth ad-
justment.
1. Actuate the
green
3
tractor control unit so that the hydraulic
cylinders are completely extended.
2. Continue actuating the control unit for another 10 s.
→
An overflow process is initiated that flushes all of the cylinders.
This adjusts the cylinders to the same length.
Headland turning
When turning on the headlands, the disc gangs must be raised to
prevent transverse loads.
1. Actuate
green
2 tractor control unit.
→
Lift the tools and the drawbar.
After the headlands:
2. Actuate
green 1
tractor control unit.
→
Lower the tools and the drawbar.
3. Move the green tractor control unit to the float position.
CAUTION
Use at headland only when the direction of the implement corre-
sponds to the direction of working.
When the implement is used, the previously set working depth is au-
tomatically reverted to.
84
Catros BAG0110.10 10.19
