Connecting and disconnecting the implement
7.1
Coupling the lower link hitch
Coupling on the lower link hitch
1. Attach ball sleeves onto the lower link pins of the implement and
secure them with linch pins.
2. Direct people out of the danger area between the tractor and
implement before you approach the implement with the tractor.
3. Drive the tractor in reverse towards the implement so that the
lower link hooks of the tractor pick up the lower ball sleeves of
the lower pivot point of the implement.
→
The lower link hooks lock automatically.
4. Secure the tractor against unintentional start-up and uninten-
tional rolling.
5. Perform a visual check to ensure proper locking of the lower link
hooks.
6. Couple the supply lines with the tractor.
7. Check that the stop tap for the disc array is closed.
8. Remove both jacks and mount them on the side of the drawbar.
9. Disengage parking brake.
10. Remove wheel chocks.
11. Check that the drawbar hydraulic cylinder is completely retract-
ed.
12. Activate tractor control unit
blue
.
→
Fold in – brace the sections against each other.
13. Perform a visual inspection of the section locking mechanism.
14. Adjust the implement using the tractor lower links so that the
implement height is less than 4 m and there is sufficient ground
clearance.
72
Catros BAG0110.10 10.19
